2010 General

• Two-Dimensional Modeling of Self-Propagating High-Temperature Synthesis of Strontium-Doped Lanthanum Manganate

• Grafting of 2-Hydroxypropyl-beta-Cyclodextrin on Gum Arabic-Modified Iron Oxide Nanoparticles as a Magnetic Carrier for Targeted Delivery of Hydrophobic Anticancer Drug

• Effect of Ce, Sb, and Sn on Solarization and Crystallization of an X-Ray-Irradiated Photosensitive Glass

• Wear Mechanisms of TiB2 and TiB2–TiSi2 at Fretting Contacts with Steel and WC–6 wt% Co

• Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and alpha-Quartz

• Dielectric Properties and Reliability of Zn0.95Mg0.05TiO3+0.25TiO2 MLCCs with Different Pd/Ag Ratios of Electrodes

• Design, Fabrication, and Characterization of Silicon Nitride Particle-Reinforced Silicon Nitride Matrix Composites by Chemical Vapor Infiltration

2010 Solid Oxide Fuel Cells

• Development of an In Situ Surface Deformation and Temperature Measurement Technique for a Solid Oxide Fuel Cell Button Cell

• Effect of Electrical Current on Solid Oxide Fuel Cells Metallic Interconnect Oxidation in Syngas

• Thermal Cycle Reliability of Glass/Ceramic Composite Gas Sealing Materials

• Electrophoretic Codeposition of La0.6Sr0.4Co0.8Fe0.2O3−delta and Carbon Nanotubes for Developing Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

• Experimental Study of the Aging and Self-Healing of the Glass/Ceramic Sealant Used in SOFCs

• Thermochemical Compatibility of a Seal Glass with Different Solid Oxide Cell Components

• Progress in Microtubular Solid Oxide Fuel Cells

2009 Ceramics for Microwave Technology

• Microwave Dielectric Properties and Chemical Resistance of Low-Temperature-Sintered CaZrB2O6 Ceramics

• Effect of Bi2O3 Addition on the Sintering Temperature and Microwave Dielectric Properties of Zn2SiO4 Ceramics

• The Effect of Dopants on the Dielectric Properties of Ba(B’1/2Ta1/2)O3 (B’=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Yb, and In) Microwave Ceramics

• A Novel Temperature-Compensated Microwave Dielectric (1−x)(Mg0.95Ni0.05)TiO3−xCa0.6La0.8/3TiO3 Ceramics System

• SrTiO3-Filled PTFE Composite Laminates for Microwave Substrate Applications

2009 Ferroelectric Ceramics

• Influence of SiO2 Addition on the Dielectric Properties and Microstructure of (Ba0.96Ca0.04)(Ti0.85Zr0.15)O3 Ceramics

• Effects of a Conducting LaNiO3 Thick Film as a Buffer Layer of a Pb(Zr,Ti)O3 Film on Titanium Substrates

• Role of Liquid Phase in Achieving a Fine Microstructure and Diffusive Phase Transition of MgO-Doped BaTiO3

• Effects of Rare-Earth Dopants on the Ferroelectric and Pyroelectric Properties of Strontium Barium Niobate CeramicsCT: Effects of Rare-Earth Dopants on the Ferroelectric and Pyroelectric Properties of Strontium Barium Niobate Ceramics

• Synthesis and Dielectric Properties of Niobia Coating on BaTiO3

• Synthesis and Characterization of BaTiO3-Based Foams with a Controlled Microstructure

2009 General

• Effects of Sulfur and a Lubricity Improver on the Tribological Characteristics of Si3N4 Ceramics against Steel in Fuel

• Structure and Bioactivity of Zirconia Nanotube Arrays Fabricated by Anodization

• PhysicoChemical Characterization of Strontium- and Cobalt-Doped Lanthanum Chromite Powders Produced by Combustion Synthesis

• Effects of Preheat-Treated Aluminosilicate Addition on the Phase Development, Microstructure, and Mechanical Properties of Mullitized Porous OBSC Ceramics

• The Study on Carbon Nanofiber (CNF)-Dispersed B4C Composites

• Ceramic Laminates by Gelcasting

• Concrete Produced by Steel-Making Slag (Basic Oxygen Furnace) Addition in Portland Cement

• Energy-Absorbing TRIP-Steel/Mg-PSZ Composite Honeycomb Structures Based on Ceramic Extrusion at Room Temperature

• Degradation of Refractory Bricks Used as Thermal Insulation in Rotary Kilns for Iron Ore Pellet Production

• Sintering Behavior and Microstructure Development of Porous Silicon Nitride Ceramics Prepared in an Air Atmosphere Furnace