Welcome, please login:
[Login]   |  [Join]  |  [Renew]   |   [Contact Us]


January 7th, 2010

Al3BC3 Powder: Processing and Synthetic Mechanism

Published on January 7th, 2010 | By: pwray@ceramics.org

Volume 92 Issue 12 , Pages 2803 – 3134 (December 2009)

 

Sea-Hoon Lee, Jin-Seok Lee, Hidehiko Tanaka, Sung-Churl Choi
Published Online: Sep 24 2009 11:28AM
DOI: 10.1111/j.1551-2916.2009.03292.x

ABSTRACT

The processing parameters for the synthesis of Al3BC3 powder were optimized, and the synthetic mechanism was investigated. The mechanical mixing of the raw powders promoted the formation of secondary phases due to mechanical alloying effect and contamination. Nearly X-ray pure Al3BC3 powder was obtained after the calcination of the raw powder mixture at 1800°C for 2 h in Ar by suppressing the vaporization of aluminum. During calcination, Al4C3 layer was formed at the surface of aluminum powder by the reaction with carbon, which maintained the morphology of the aluminum powder above its melting temperature. The nucleation and growth of Al3BC3 within aluminum melt began to occur at 1000°C, and became the main synthetic mechanism of Al3BC3 at 1100°C. The Al3BC3 particles synthesized at 1100°C were porous and were composed of fine hexagonal crystals. The main synthetic mechanism of A3BC3 changed into solid-solid reaction above 1100°C, and a gas-solid reaction promoted the densification of the porous Al3BC3 powder above 1340°C.

 

Online Access to Journal of the American Ceramic Society

 

 

 

 

 


Back to Previous Page
« « Previous Post     |    Next Post » »





Comments are closed.

Back to Top ↑